Conair Multi-head Precision Trimmer Item#: NE43AC 4 Pieces, Battery Operated

IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING FOR HOUSEHOLD USE ONLY KEEP AWAY FROM WATER WARNING – 1. Use close supervision when the appliance is used by, on, or near children or individuals with certain disabilities. 2. Use appliance only for its intended use as described in this manual. Only use attachments recommended by the manufacturer. 3. Never operate the appliance if it is not working properly, has been dropped or dam - aged, or dropped into water. Return the appliance to a Conair service centre for examination and repair. 4. Do not use the appliance with teeth missing from the blades, as injury may result. Before each use, make certain the blades are aligned properly and oiled. SAVE THESE INSTRUCTIONS TROUBLESHOOTING There are several things to look for if your trimmer fails to operate: 1. Be sure the trimmer is turned ON. 2. Make sure that the battery is properly placed in the battery compartment. Test the battery to be sure it is working. 3. Check the blades to see if they are clogged with hair clippings; if so, use a cleaning brush to remove hair. 4. If the trimmer still fails to operate, take or send it to a Conair Service Centre (see warranty procedure and addresses). OPERATING INSTRUCTIONS 1. To insert battery, (not included) remove compartment cover at the back of the unit by pulling straight down (Fig.1). Insert one AA alkaline battery, negative end up. (Alkaline batter - ies will ensure the best performance and longest life for your appliance.) If you are not going to use the unit for a long period of time, or if the battery is dead, remove the battery from the unit. Remove used batteries promptly. This will increase the life of your trimmer. 2. After inserting the battery, replace the battery compartment. 3. Now your unit is ready to be used. *Do not use in the shower. To clean simply rinse trimmer blade under faucet. 4. To use your trimmer, push On/Off switch upwards to “On” position. 5. After you finish using your trimmer, push down on the On/Off switch to turn the trimmer off. 6. Always purchase the correct size and grade of battery most suitable for the intended use. 7. Replace all batteries of a set at the same time. 8. Clean the battery contacts and also those of the devise prior to battery installation. 9. Ensure the batteries are installed correctly with regard to polarity (+ and -). 10. Remove batteries from equipment, which is not to be used for an extended period of time. 11. Remove used batteries promptly. 12. Store unused batteries in their original packaging, away from metal objects that could short-circuit them. Never short-circuit batteries. 13. Never dispose of batteries in fire, except under conditions of controlled incineration. Failure to observe this precaution may result in an explosion. Never attempt to recharge primary batteries as this may cause leakage, fire, or explosion. GETTING STARTED TO SWITCH TRIMMER HEADS Hold the handle of the trimmer while turning the trimmer head counterclockwise until the "I" mark is aligned properly with the "arrow" mark (Fig. 2). At this point you should be able to easily lift the trimmer head from the handle. To use a new trimmer head on the unit, properly install the head into position making sure the "I" mark is aligned with the "arrow" mark, turn clockwise until the "I" and "circle" marks are aligned (Fig. 3) and lock into position. TO TRIM NECKLINE & SIDEBURNS Attach the all-purpose 20mm trimmer attachment to the trimmer handle. Hold the trimmer blade against the skin at the length desired and move the trimmer downward. TO TRIM EYEBROWS Attach the angled detail trimmer to the trimmer handle. Turn unit on. To shape and define, move the trimmer without the eyebrow comb attachment slowly so as not to cut any hair you do not intend to trim. Once shaped and defined, you may thin out the hair using the eyebrow comb attachment. CLEANING YOUR TRIMMER Make sure trimmer is off. 1. To remove the trimmer head for cleaning, turn the head counter-clockwise until the "I" mark aligns with the "arrow" mark, then lift the head gently (Fig. 4). 2. Only rinse the head under water (Fig. 5). For proper functioning of the unit, the handle can not touch or be immersed in water. 3. After cleaning, make sure to shake dry the head before replacing it to the body. 4. To reassemble the head onto the body, align the "I" mark on the head with the "arrow" mark on the body and then turn clockwise until the "I" mark aligns with the "circle" mark on the body (Fig. 6). LIMITED TWO YEAR WARRANTY Conair will repair or replace (at our option) your unit free of charge for 24 months from the date of purchase if the appliance is defective in workmanship or materials. To obtain service under this warranty, return the defective product to the service centre listed below, together with your purchase receipt and $5.50 for postage and handling. In the absence of a purchase receipt, the warranty period shall be 24 months from the date of manufacture. ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 24 MONTH DURATION OF THIS WRITTEN, LIMITED WARRANTY. IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS OR IMPLIED, WHATSOEVER. This warranty gives you specific legal rights, and you may also have other rights, which vary from province to province. USING THE 5-POSITION TRIMMING COMB 1. To use the 5-position comb, attach the comb to the 20mm trimmer head by sliding the unit over the trimmer blades and snapping it down into position. 2. At first, until you become familiar with the adjustments, use the longest setting. (You can always go back and trim hair shorter.) 3. Using smooth, even strokes gently move the comb through the hair in the direction of growth. (Never attempt to trim against the natural growth of your hair because it will be cut too short.) 4. If you decide to make your hair shorter, you can now adjust the 5-position comb attachment to a shorter setting until the desired length of hair is achieved. 5. When you have finished, run a comb or brush (not included) through the hair to remove any loose hairs. TAKING CARE OF YOUR TRIMMER BLADE CARE Because the trimmer blades are precision made for a very special use, they should always be handled with care. Each time you finish using the trimmer, brush away any loose hair that has col - lected in the blades, then rinse blades under water only and store the trimmer in its storage stand until the next use. To promote the long life of the appliance, use your trimmer only for the purpose intended by the manufacturer. NE43AC DETAIL TRIMMER 1. Angled head with powerful, stainless steel blades 2. No-slip gri p ™ handle 3. Cordless/battery operated (requires AA battery; not included) 4. 5-position trimming comb 5. 20mm trimmer head 4. 3. 5. 1. 2. IB-13847